Weber Packaging Solutions, Inc.         Home   |   Log-In   |   Go-Label eStore                                  
Weber logo



Bottle-Matic II Dual Label Applicator

The Bottle-Matic II goes one step further by applying front and back pressure-sensitive labels to cylindrical objects. This makes it easy, for example, to label round containers with a eye-catching decorative label on the front and a nutrition/ingredients label on the back.

The Bottle-Matic II is available in 10"-wide and 16"-wide models that fit most products. Options include a waster rewinder that collects the label liner as it is used and a large roll adapter so you can work longer between label roll change-overs.

Download Overview Brochure  arrow



Buy Bottle-Matic now

The Bottle-Matic II two-sided bottle label  applicator

Features

Bottle-Matic II two-sided bottle label applicatorBottle-Matic II Dual Label Applicators

Bottle-Matic II labelers enable you to label the front and back of all kinds of cylindrical objects by setting the desired spacing using the unit's index knob. The operator inserts the container and depresses a footswitch and the label is applied. The machine immediately inserts a gap that was set by the index knob and applies the second label.

Most wine bottles are labeled in less than five seconds, enabling the user to quickly remove the bottle and insert another to start the procedure again. After a rhythm is established, bottles can be labeled very quickly.

Loading labels is easy as well; just feed the labels between the dispensing tables, then through the patented feed-roll assembly and snap it into place.

The Bottle-Matic comes in two sizes: Standard 10" wide and the larger 16" wide version for taller products. Both can handle products up to 10" in diameter.

Label objects from 0.5" to 10" diameter; ideal for test tubes to 1.5-gallon bottles.

Gap adjustment is quick and easy.

Accurate: Maintains repetitive gap spacing to 0.0625" or less on most containers. Holds 0.0312" side-to-side accuracy on most containers.

Labels cylinders to 15" in length (or longer if the item has a neck).

Able to handle most tapered containers by simply adjusting the idle roller position.

Labels over 1000 pieces per hour with average dexterity.

Side frames are laser cut from quality steel, then formed, countersunk, deburred and inspected.

Dispensing tables are formed out of 6061-T6 aluminum. Its peel edge is hand-milled to spec within .001".

Dispensing tables are polished with ultra-fine polishing compound so paper flows freely around the plate.

Bottle-Matic II uses dual AC-shaded pole gear motors.

Micro-switch activated; will work on all kinds of labels.

Modifications are available for those hard-to-label containers.

Specifications

Bottle-Matic II Dual Label Applicator Specifications


  Bottle-Matic II 10" Applicator Bottle-Matic II 16" Applicator
Size (LxWxH) 15" x 17" x 8" 21" x 17" x 8"
Weight 17 lbs. (packaged weight 32 lbs.) 28 lbs. (packaged weight 38 lbs.)
Voltage 115v/220v 115v/220v
Container Diameter 0.5" to 10"* 0.5" to 10"*
Label Requirements Die cut labels printed in copy position #3 or #4. Minimum width of backing paper should be 1.5". Must have an 0.125" gap between labels on a 3" core.
Label Width 0.5" to 8" 0.5" to 15"
Label Length 0.5" to 25" 0.5" to 25"
Labeling Speed 4.5" plus per second 4.5" plus per second
Production Per Hour 1000 pieces using a 7" long label** 1000 pieces using a 7" long label**
Label Thickness Most labels 4 mil or thicker including Mylar, foil and actetate labels.
Max Roll Diameter Standard 9"; optional 15" roll adapter
Max Roll Weight None
Actuation Semi-automatic with footswitch and solid-state controls
(push-button optional at no additional charge)


*Smaller diameter (less than 1.5") or lighter-weight empty plastic bottles may require the use of the pressure arm included with the machine.

**Actual production will depend on the operator efficiency in placing and removing containers to be labeled

Extras & Video

Compatible Products
Pressure-Sensitive Labels

Downloads
Brochure (pdf)
Manuals (pdf)



 


Weber Products
Labels
Label Printer-Applicators
Label Applicators
Labeling Software
Label Printers
Ink Jet Coders
RFID Solutions
Printer Ribbons


Weber Customer Service
Order Information
Equipment Service
Software Support
Labeling Software FAQ's
Direct Sales
Strategic Partners
Graphics Department

Corporate Info
Contact Us
Career Opportunities
Mission Statement
Quality
Manufacturing Capabilities
Locations Worldwide
Directions

Follow Weber

blog button
Weber's label blogWeber's Twitter feedWeber's LinkedIn page
Weber's Facebook pageWeber's YouTube ChannelWeber's Pinterest Page

Weber RSS feed Subscribe to our blog