Weber Packaging Solutions, Inc.         Home   |   Log-In   |   Go-Label eStore                                  
Weber logo


HERMA H400 Tamp-Blow Label Applicator

If you need to apply labels into a recessed area on a product, then take a look at the HERMA Tamp-Blow labeling system.

This non-contact pressure-sensitive label applicator is a Weber exclusive. We've adapted the proven tamp-blow module from our Model 4300 label printer-applicator and integrated it with the robust HERMA H400 label applicator.

Utilizing tamp-blow technology, each label is peeled from its liner and is retained by vacuum on the unit's tamp pad. When a product is sensed by the system's photoelectric eye, the pad is extended and the label is blown onto the package from approximately 0.25".

Controller and operating display is built in; no separate controls required
Automatic synchronization of labeling and product handling speeds
Special unwind unit provides consistent web tension
Applies labels up to 6.0" wide

Download Overview Brochure  arrow

Herma Tamp-Blow Label Applicator

Features

HERMA H400 Tamp-Blow

This tamp-blow pressure-sensitive label applicator was designed and built by Weber to fill a need for labeling fragile substrates and packages. This tamp-blow labeler is perfect for labeling clamshells and other packaging with recessed areas. The air-blown label can be positioned and applied easily with a high degree of accuracy.

If you need to apply pressure-sensitive labels without contacting a product or package, take a look at the HERMA Tamp-Blow label applicator. It can consistently label packages up to 1230 inches of label web per minute. This is a heavy-duty industrial labeler that can accomodate several sizes of tamp-pads to handle a variety of label dimensions.

Features at a glance

Controller and operating display is built in; no separate controls required
Automatic synchronization of labeling and product handling speeds
Comprehensive selection of modules
Special unwind unit provides consistent web tension
Applies labels up to 6.0" wide standard
IP66 rated for dust and water protection
Right- or left-hand configurations
Easily connects to PLCs
Handles transparent labels without incident
Simple to expand or reconfigure



Herma H400 Unwind Unit Herma H400 control panel
Unwind Unit
Unwind unit maintains a constant web tension, preventing tolerance issues at the peel bar. Threading and tensioning the web are very user-friendly.

Control Panel
Clearly-defined display panel facilitates adjustments to operational parameters; provides 30 preset functions.

Specifications

HERMA H400 Series Tamp-Blow Label Applicator Specifications

Height
23.40"

Length
34.90"

Width
30.81"

Motor(s)
Servo-driven

Electrical
Universal 100-240VAC, 50-60Hz

Weight
Standard Unit: Approx 80 lbs.
(Up to 170 lbs. with U-arm and 12" roll of labels)

Air Requirements
3 cfm @ 90 psi

Product Sensing
Photoelectric

 




Label Sizes
Up to 6" wide x 6" long

Tamp-Pad Sizes Available
4" x 4", 4" x 6", 6" x 4" and 6" x 6"

Labeling Speeds
Up to 1230 inches of label web per minute

Accuracy
±0.03" (.8mm) when product handling is controlled

Duty Cycle
24/7, 50 weeks

Extras

Compatible Products
Pressure-Sensitive Labels
Applicator Stand

Downloads
Brochure (pdf)
Manuals (pdf)

 


Weber Products
Labels
Label Printer-Applicators
Label Applicators
Labeling Software
Label Printers
Ink Jet Coders
RFID Solutions
Printer Ribbons


Weber Customer Service
Order Information
Equipment Service
Software Support
Labeling Software FAQ's
Direct Sales
Strategic Partners
Graphics Department

Corporate Info
Contact Us
Career Opportunities
Mission Statement
Quality
Manufacturing Capabilities
Locations Worldwide
Directions

Follow Weber

blog button
Weber's label blogWeber's Twitter feedWeber's LinkedIn page
Weber's Facebook pageWeber's YouTube ChannelWeber's Pinterest Page

Weber RSS feed Subscribe to our blog