• Phone 1.800.843.4242
  • info@weberpackaging.com
  • 711 W. Algonquin Rd., Arlington Heights, IL , USA
The Alpha Tamp-Blow label applicator


Alpha Tamp-Blow Label Applicator

Alpha Tamp-Blow label ApplicatorWeber’s Alpha Compact Tamp-Blow label applicator is a cost-effective solution to fast, reliable non-contact pressure-sensitive labeling. This system features a small footprint, yet employs a highly-accurate tamp-blow method of application to affix p-s labels onto products on your production line.

The Alpha Compact tamp-blow unit automatically unwinds the supply roll and dispenses the labels onto a tamp pad. As the product coming down the conveyor triggers a sensor, the tamp pad holding the label extends to the product.

A proximity sensor on the tamp pad stops the motion a quarter-inch from the product where the label is blow onto the product. This non-contact method of label application is perfect for labeling recessed areas on products such as clamshells and containers with raised edges.This system applies labels up to 4.7” wide and 6.3” long at speeds up to 164 feet per minute to a tolerance of ±0.05”.




Features

Alpha Tamp-Blow Label Applicator
The Alpha Compact tamp-blow unit automatically unwinds the supply roll and dispenses the labels onto a tamp pad. As the product coming down the conveyor triggers a sensor, the tamp pad holding the label extends to the product.

A proximity sensor on the tamp pad stops the motion a quarter-inch from the product where the label is blow onto the product. This non-contact method of label application is perfect for labeling recessed areas on products such as clamshells and containers with raised edges.This system applies labels up to 4.7” wide and 6.3” long at speeds up to 164 feet per minute to a tolerance of ±0.05”.

The versatile unit can be oriented to apply labels to the sides, tops or bottoms of packages. To accommodate various production environments, the Alpha Compact can be specified for right- or left-hand applications.

Alpha Tamp-Blow ControllerThree Interfaces

Depending upon the complexities and demands of the particular labeling operation, the Alpha Compact is available with three separate interfaces:

• Panel HMI includes an external operator's panel that provides system control through a pair of potentiometers and four push-buttons.

• Display HMI replaces the operator's panel with an LCD display that provides full access to all adjustment parameters.

• USB utilizes a USB connection that permits the unit to be configured from a PC.

Each version of the Alpha Compact features rugged die-cast aluminum construction, single-key calibration, automatic recognition of missing labels, in-production speed adjustment, and more.

Specifications

Dimensions
28.15" x 12.2" x 23.22"
(715mm x 310mm x 590mm)

Alpha Tamp-Blow label applicatorWeight
48.5 lbs. (22kg)

Electrical
115/230 VAC, 47/63Hz

Air Requirements
3 cfm at 90 psi

Product Sensing

Photoelectric

Label Roll Size
Up to 12" O.D. (300mm) wound on 3" (76mm) core

Labeling Speed
Up to 164 fpm (50m) depending on label roll width and diameter

Label Placement
Accurate to ±0.05" (1.5mm) when labels are produced to specifications and product handling is controlled

Standard Label Sizes
Min width: 1.96” (50mm)
Max width: 4.7” (120mm)
Min length: 1.78” (40mm)
Max length: 6.3” (160mm)

Options
• Adjustable stand
• Low-label sensor
• Three-color stack light





Alpha HSM high-speed label applicator