Dimensions
30.13”L x 27.9”W x 22.98”H
(76.5cm x 70.9cm x 58.4cm)
Weight
165 lbs. (75kg)
Electrical
92 to 263V AC/50-60 Hz, 5 Amp
Air Requirements
7 cfm at 72 psi
Product Sensing
Photoelectric
Communication Interface
Volt-free outputs (relays), optocoupler inputs, M12 connection for photocell and alarm lamp
Printing Methods
Direct-thermal and thermal-transfer
Print Resolution
203, 300 or 600 dpi, dependent upon print engine selected
Label Roll Size
Maximum diameter 13.75" O.D. (350mm)
Labeling Speed
Contingent upon print engine and label size/content
Label Placement
Accurate to ±0.03" (.76mm) when labels are produced to specifications and product handling is controlled and consistent
Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width; direct or thermal-transfer
Labeling Software
Weber Legitronic® software
Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)
Max Print Width
• Zebra ZE511 203, 300 and 300 dpi: 4.09" (104mm)
• Zebra ZE521 203 and 300 dpi: 6.6" (168mm)
• Sato S84-ex: 4.1" (104 mm)
• Sato 86-ex: 6.6" (167.5 mm)
Print Speed & Resolution
• Zebra ZE511 203 dpi: Up to 18.0"/second (457mm)
• Zebra ZE511 300 dpi: Up to 14.0"/second (356mm)
• Zebra ZE511 600 dpi: Up to 6.0"/second (152mm)
• Zebra ZE521 203 dpi: Up to 14.0"/second (356mm)
• Zebra ZE521 300 dpi: Up to 12.0"/second (305mm)
• SATO S84-ex Series: Up to 16", 14" or 6"/second (406.4mm, 355.6mm, 152.4mm) @ 203, 300 or 600 dpi
• SATO S86-ex Series: Up to 14" or 12"/second (355.6mm, 304.8mm) @ 203 or 300 dpi
Label Width Range
• Zebra ZE511 203, 300 and 600 dpi: 0.625" (16mm) to 4.5" (114mm)
• Zebra ZE521 203, 300 and 600 dpi: 3” (76mm) to 7.1" (180mm)
• Sato 84-ex: Max 5.16" (131mm); Min 0.51" (13mm)
• Sato 86-ex: Max 7.09" (180mm); Min 2.13" (54mm)
Optional Features
• Adjustable Stand
• RFID upgradeable print engine
• Label-on-pad sensor
• NRTL ready
• Beacon alert lights
• Available stroke lengths: 4”, 8”, 12”, 16”, 20” 24”
• Available tamp pad sizes: 4.5” x 6”; 4.5” x 8”; 6” x 4”; 6” x 6”. Pads are configurable (punchable) to specific label sizes.